Hengstler - Proximon

Flexible Counter Family- designed for different applications

You can choose from a selection of eight versions with each version offering special features that are trimmed to match the needs of the target application.

The counters are divided into:

-Counting, Position Indication
-Tachometer, Rate Meter, with or ..without integrated Totaliser
-Preset Counters, Batch Counter
-Time Preset Counter

Overview

gff

Input Modes,Featutes

Value Range

Totaliser

A+B,A-B,Direction,Quad	0..........99999
Preset Value used for colour switching	0..........99999

Position Indicator

Quad	-19999......99999
Upper and Lower Range Limits	-19999......99999
Set Value	-19999......99999
Option:Linear Output,Scalable,Isolated	0/4-20 mA,0/1-5 V,0/2-10 V

Rate Meter

A,A/B,1/A (displays the impulse duration)	0.....99999
Extended Rate Calibration Factor	0.0001...99999
Upper and Lower Range Value	0.....99999
Display refresh and Zero display time	0.1 ... 10 sec
Minimum impulses for display start	1..99
Alarm suppression during startup, hold function	0...99 sec
Option:Linear Output,scalable,insulated	0/4 - 20 mA, 0/1-5 V,0/2-10 V

Rate Meter+ Totaliser

A+B, A - B,Direction,Quad	0.....99999
Totaliser	0.....99999
Extended Rate Calibration Factor	0.0001...99999
Upper and Lower Range Value	0.....99999
Display refresh and Zero display time	0.1 ... 10 sec
Minimum impulses for display start	1..99
Alarm suppression during startup, hold function	0...99 sec
Option:Linear Output,scalable,insulated	0/4 - 20 mA, 0/1-5 V,0/2-10 V

Preset Counter

A+B, A - B,Direction,Quad	0.....99999
1 or 2 Presets (P 1 as absolute Preset or Prewarm)	0.....99999
Up/down with or without auto reset mode	0- > P2, P2 -> 0
Out 1 and Out 2 seperately programmable	latch or 0.01...99.99 sec

Batch Counter

A+B, A - B,Direction,Quad	0.....99999
Up/down with or without auto reset mode	0- > P1, P1 -> 0
Preset,Batch Preset, Totaliser	0....99999
Out 1 and Out 2 seperately programmable	latch or 0.01...99.99 sec

Preset Time Counter

Time formats programmable	9999.9 s,9999.9 m, 9999.9 h,mmm:ss, hhh:mm
time preset with output signal	0.....99999
Count direction up/down	0- > P1, P1 -> 0
Count Mode	Single,Accumulating

Technical Data

Terminals

Count Inputs

Active Edge	NPN or PNP programmable:capable ofTTL:30 V DC max
With PNP	High >=3.0 V, Low < 2.0 V: or open; 10 kOhm to 0V
With NPN	High >=3.0 V or open, Low < 2.0 V: or open; 10 kOhm to 0V+
Frequency	20 Hz, 200 Hz or 10 KHz programmable

Magnetic Input

Type	Capacitive: 0.5 to 30 V (only available for rate meters

Control Inputs

CTRL1	NPN: High >- 3.0 V or open,Low <2.0 V:4,7 kOhm to V+
(Reset or hold)	edge sensitive ; 25 ms min,max 30 V DC

CTRL2	NPN: High >- 3.0 V or open,Low <2.0 V:4,7 kOhm to V+
(Progr.security)	level sensitive ; 25 ms min,max 30 V DC

Outputs

OUT 1 NPN	NPN , open collector: 30 V DC max:100 mA max
OUT 2 NPN	response time < 75 Us

Relay 1	Changeover form C: 240 V AC/3A or 110 V AC /5 A:pull-in
Relays 2(opt)	time 8 ms

Auxilary	9....15 (unregulated V DC), 125 mA max: residual ripple< 0.5 V
Power Supply

Special Features

Display color programmable
Count Calibrator 0.0001 to 9.9999 as standard
Preset Lockout and Reset Disable programmable
Program Securityvia CTRL 2
Hold function on Tacho version
Optional Linear Output

Ordering Data